自从依缘推出现货工作服以来，许多客户都会担心，依缘工作服的质量过不过关，会不不太贵，买到的衣服不划算等问题。在这里，我可以明确的告诉大家，依缘是一家有着十五年工作服生产经验的厂家，不管是线上还是线下，我们都是有质量保障的。和我们合作过的客户有上千多家，不仅是依缘的功劳，更是因为客户相信我们，愿意在我们这里订衣服。今天依缘小编跟大家分享一下验收工作服注意的几个点！
Since the introduction of the spot since the edge of the work clothes, many customers will worry about, according to the edge of the quality of work clothes can not pass, the price will not be too expensive, the clothes are not worth buying and so on. Here, I can definitely tell you, according to fate, is a fifteen year work experience in the production of clothing manufacturers, whether online or offline, we are quality assurance. We have worked with more than 1000 customers, not only in accordance with the merits of the credit, but also because customers believe that we are willing to order clothes here. Today, according to the small Bian Bian, share with you a few points to note the acceptance of work clothes!
1、做工看走线
1, work to see the line
济南工作服定做http://www.sdzzfs.com/线路主要是看衣服的车线是否直?是否匀称?针距是稀还是密?一般针距密的比较好点，在开始的时候有没有打“倒回针”，拼接处有没对齐。倒回针：在一件衣服开始做一般要来回走几针，这样衣服就不容易开口，还有车一个部位结束的时候也要打倒回针。都是防止他一拉就暴口一般梭织的比较明显，比如一条梭织的裙子，你可以看他接口处有没多走几针，看侧缝也可以看衣服都看一些比较偏的地方，一般人不注意查看到的地方，“领子““袖子、袖口腋下等”。
The line is mainly to see whether the straight line car clothes? Whether symmetry? Stitch is thin or dense? Generally stitch density is better, in the beginning there is no "back needle", there is no splicing alignment. Back stitching: in a dress to do to go back and forth a few needles, this dress is not easy to open, and when a car parts end to back stitch. It is to prevent violence in general, he pulled the loom more obvious, such as a woven dress, you can see him at the interface have to go a few needles, see side seam can also see the clothes are some of the more places, people do not pay attention to the local view, "", "collar sleeves the cuffs of armpit etc.".
2、线头干净

2, thread clean
一般的衣服。他们有尾部，有专门的人剪线头，一般的便宜的衣服一般没有。还有一件衣服如果要求质量好的话，好线头不超过1cm。
General brand clothes. They have the tail, there are special people cut thread, the general cheap clothes generally not. There is also a piece of clothing, if the quality is good, it is best to thread less than 1cm.
3、规格
3, specifications
讲规格，也就是大家所了解的，衣服的尺码一定要正，不要标的是M，实际是L。出现乱码或者错吗的现象。
First of all, specifications, that is what you know, the size of the clothes must be positive, not subject to M, the actual L. Garbled or wrong?.
4、车线是否整齐
4 、 is the bus line tidy?
这个拉线的松和紧是在不同的部位有不同的要求，比如是肩部，人体经常活动的部位，松一点比较好，在衣服的下面，就紧一点比较好，好一件衣服均匀好、领口、领口针脚、腋下车线、接口是否有倒回针。
This cable is loose and tight have different requirements in different parts, such as shoulder, the body is often part of the activities, relax a little better, at the bottom of the tight clothes, a little better, the best clothes, best uniform collar, collar pin, underarm car line, whether there is interface back stitching.
5、板型
5, plate type
左右对称不，还有就是切片整齐不。
Symmetrical, no, and there are slices, not neat.
6、规范包装
6, standardized packaging
看一件衣服，平铺下去，看一下会不会有色差，时准除外，还有就是衣服上下是否均匀，然后检查有没有小洞等等。
Look at a piece of clothing, first tile down to see if there will be chromatic aberration, when accurate except, and there is whether the clothes up and down uniform, and then check whether there are holes, and so on.
以上就是依缘小编给大家讲解的内容，相信大家都有所了解了吧。希望企业在验收工作服的同时，能够参考以上的几个方面哦！！！
The above is in accordance with the small margin for everyone to explain the content, I believe we all know something about it. Hope that enterprises in the acceptance of work clothes at the same time, can refer to the above aspects!!!