工作服，不少大型的公司或工厂都会有。因为它代表着一个公司的企业文化，它有着宣传与提醒意义，而且在一些特殊行业，工作服有着防护作用。但是每个公司的采购人员却不一定对工作服的验收标准有所了解，因此也不会制定相关的要求。
Work clothes, many large companies or factories will have. Because it represents a company's corporate culture, it has publicity and reminder of significance, and in some special industries, work clothes have protective effect. However, each company's purchasing personnel do not necessarily understand the acceptance criteria of the work clothes, so they will not make relevant requirements.
因为工作服属于大批量的订购，如果出现问题，损失将会很大，所以各个公司厂家如果不掌握其中的验收标准，一旦遇上了不合格的工作服，就会出现巨大损失，耽误自身工作。为了让大家能够更深入地了解这方面的知识，今天妙衫工作服小编为大家讲述如何制定工作服定做验收标准。
Because the work clothes belong to a large number of orders, if there is a problem, the loss will be great, so each company if you don't grasp the acceptance standard, once met the unqualified work clothes, will appear huge losses, delay their work. In order to let you have a deeper understanding of this knowledge, today's wonderful work clothes Xiaobian tell you how to make custom acceptance standards for overalls.
1、做工看走线
1, work to see the line
线路主要是看衣服的车线是否直，是否匀称，针距是稀还是密，一般针距密的比较好点，在开始的时候有没有打“倒回针”，拼接处有没对齐。
The line is mainly to see the clothes car line is straight or not, whether the symmetry, the needle distance is thin or dense, dense needle from the general good, in the beginning there is no "back needle", there is no splicing alignment.
倒回针：在一件衣服开始做一般要来回走几针，这样衣服就不容易开口，还有车一个部位结束的时候也要打倒回针。
Back stitching: in a dress to do to go back and forth a few needles, this dress is not easy to open, and when a car parts end to back stitch.
都是防止他一拉就暴口一般梭织的比较明显，比如一条梭织的裙子，你可以看他接口处有没多走几针，看侧缝也可以看衣服都看一些比较偏的地方，一般人不注意查看到的地方，“领子““袖子、袖口腋下等”。
It is to prevent violence in general, he pulled the loom more obvious, such as a woven dress, you can see him at the interface have to go a few needles, see side seam can also see the clothes are some of the more places, people do not pay attention to the local view, "", "collar sleeves the cuffs of armpit etc.".
2、线头干净
2. Clean thread

一般的衣服。他们有尾部，有专门的人剪线头，一般的便宜的衣服一般没有。还有一件衣服如果要求质量好的话，好线头不超过1cm。
General brand clothes. They have the tail, there are special people cut thread, the general cheap clothes are generally not. There is also a piece of clothing, if the quality is good, the best thread head is not more than 1cm.
3、规格
3, specifications
讲规格，也就是大家所了解的，衣服的尺码一定要正，不要标的是M，实际是L。出现乱码或者错吗的现象。
First of all, specifications, that is, you know, the size of the clothes must be positive, not the target is M, the actual L. Garbled or wrong?.
4、车线是否整齐
4, the car line is neat
这个拉线的松和紧是在不同的部位有不同的要求，比如是肩部，人体经常活动的部位，松一点比较好，在衣服的下面，就紧一点比较好，好一件衣服均匀好、领口、领口针脚、腋下车线、接口是否有倒回针。
This cable is loose and tight have different requirements in different parts, such as shoulder, the body is often part of the activities, relax a little better, at the bottom of the tight clothes, a little better, the best clothes, best uniform collar, collar pin, underarm car line, whether there is interface back stitching.
5、板型
5, plate type
左右对称不，还有就是切片整齐不。
Right and left symmetry, no, and the slices are neat.
6、规范包装
6, standardized packaging
看一件衣服，平铺下去，看一下会不会有色差，时准除外，还有就是衣服上下是否均匀，然后检查有没有小洞等等。
Look at a piece of clothing, first tile down, see if there will be color difference, when the exception, and there is whether the clothes up and down uniform, and then check whether there are holes and so on.

以上文章来源于济南工作服http://www.sdzzfs.com/